Ajax CombiProtect Combined Motion and Glass Breaking Sensor
Ajax CombiProtect wireless motion and glass breaking detector is used to detect human movement and detect the fact of glass breaking in a protected area.
Features of Ajax Motion Sensor and Glass Breaking
Easy installation and setup of a wireless motion sensor and glass breaking.
Mounting the sensor on the SmartBracket mount will not damage the repair and does not require disassembling the device case.
The case of the motion sensor and breakage is protected by a tamper from opening.
The wireless sensor continuously transmits test signals to the alarm control panel. The survey period of the detectors can be adjusted at your own discretion. If you try to steal or break the sensor, the smart central security system will immediately know about it and send an alarm.
Thanks to a special energy-saving algorithm, the detector runs on a pre-installed battery for up to 5 years.
To monitor the operation of the alarm, the motion detector regularly transmits a low battery signal to the central. The user will be promptly notified of the need to replace the battery in the sensor.
The information transmitted by the motion sensor and smashing is protected from attempts of substitution and interception.
The wireless motion and breakage sensor works with the Ajax ocBridge wireless signal receiver.
The maximum distance between the motion sensor and the alarm center is 2000 m in the absence of obstacles.
The frequency of operation of the combined general-purpose sensor 868 MHz does not require a license to use.
The data transmission power is adjusted depending on the distance to the control panel, which allows you to consume less energy from the pre-installed battery.
The combined detector filters false alarms about a crash due to thunderclaps, a dog barking or the hum of a passing truck.
The combined sensor detects the movement of objects at a distance of up to 12 m, and the sound of glass breaking — up to 9 m.
The sensitivity of the wireless motion and breakage sensor is adjustable. You can choose the optimal sensitivity of the detector based on the size of the pet that will be located in the protected area.
You can configure the protection of both a single window and an entire room with combined Ajax CombiProtect sensors.
The device does not react to random movements of inanimate objects.
Ajax CombiProtect wireless alarm sensor ignores pets weighing up to 20 kg, up to 50 cm high.
The security motion and glass breaking sensor detects movement even in hot climates thanks to temperature compensation.
A wireless combined motion and shattering sensor alerts intruders through doors and windows and monitors the integrity of glass.
