Wireless motion Sensor from Ajax Systems — MotionCam (PhOD)
MotionCam (PhOD) is a wireless motion sensor from Ajax. MotionCam (PhOD) for indoor installation detects movement in a room under guard and allows you to take photos from the scene not only on alarm, but also on request. The MotionCam (PhOD) Jeweller motion sensor will show the current situation at the object under protection in seconds and dispel doubts in case of an alarm. You can request a photo in one click in the Ajax application. Also, the sensor will automatically take a series of photos if it detects movement or the FireProtect or FireProtect Plus fire sensor is triggered.
The principle of operation of the wireless motion sensor for MotionCam signaling (PhOD)
The wireless motion sensor for the MotionCam indoor installation (PhOD) works with the Ajax security system. The internal motion sensor communicates with the control panel of the system at a distance of up to 1700 meters, using two protected radio protocols — Jeweller for transmitting events and alarms and Wings. The second protocol is responsible for transmitting photo data from the event location. MotionCam (PhOD) Jeweller is a wireless motion sensor for indoor installation with support for photoverification. The device detects movement in a guarded room using an IR sensor and captures moving objects with a temperature close to the temperature of the human body. After the sensor detects movement, the built-in camera takes a series of pictures. In this way, the user can evaluate the event in dynamics. When the MotionCam wireless motion sensor (PhOD) is triggered, the event is transmitted to the control panel of the security system, which launches scenarios, turns on sirens, informs users and the security company about the alarm. Each operation of the MotionCam (PhOD) Jeweller motion sensor is recorded in the Ajax application notification feed. The alarm message also indicates the room in which the sensor was triggered, the name of the central and the name of the device.
Photos on request
The MotionCam (PhOD) Jeweller motion sensor allows users to take pictures using the built-in cameras. Using the function, you can check the situation at the facility or simply monitor the condition of the house. Depending on the settings, photos can be taken at any time or when the motion sensors with alarm photoverification are in security mode. By default, the "Photos on Demand" feature is disabled for system users. Users with the right to manage privacy settings (control panel settings, Privacy item) determine who can take and view photos on request, as well as which sensors with photoverification can be used for shooting. PRO users of the system cannot manage privacy settings, but they can take photos on request if they have been granted such a right. Privacy settings do not apply to photos taken by sensors during an alarm. Photos of the event can be seen by all users of the system who have access to the event feed of the control panel of the system.
Photo according to the script
The "Photo by Scenario" function allows you to create a scenario for MotionCam series motion sensors, according to which they will take pictures when other Ajax devices are alarmed. By default, the "Scenario Photo" function is disabled for all motion sensors. The function can be enabled by a user with access to privacy settings. Users of PRO-applications cannot manage privacy settings, but they can grant this right to system users. In the system settings, you can also set when exactly the sensor with photoverification can take pictures according to the scenario: when the MotionCam (PhOD) Jeweler is in security mode or at any time. Photos according to the scenario are available to all users of the security system who have access to the event feed. The event about the photo when other devices are alarmed is sent to the remote control of the security company.
